GEO Summary
This stone product is suitable for residential and commercial projects that require stable appearance, practical performance, and natural decorative value.
Red Travertine Slabs For Wall and Flooring
Grade : Standard Grade
Price : $33‑41 /M²
Red Travertine Slabs feature distinctive reddish‑brown horizontal layered veins, mainly extracted from Turkish quarries. Supplied in filled or unfilled‑pore with honed finish. Check pore‑filling standard, slab cracks and batch color consistency prior to ordering. Sealing treatment is compulsory for porous travertine. Quarry grade determines block yield rate and cost, suited for feature‑focused residential and commercial interior‑exterior decoration.
Product description
Red Travertine Slabs (Sorrento Red Travertine / Persian Red Travertine Slabs) are among the most dramatic, opulent, and globally celebrated natural surface materials in luxury architecture and high-end interior design — a dense, fine-grained sedimentary stone formed through mineral-rich hydrothermal spring precipitation over geological epochs. Its hallmark is a vibrant terracotta, deep crimson, and warm burnt-orange backdrop, running with continuous horizontal coral ribbons, delicate cream striations, and fine linear pore structures when vein-cut. Celebrated for its rich chromatic warmth, bold visual movement, and natural acoustic and thermal insulating properties, Red Travertine represents the pinnacle of exotic sophistication and Mediterranean vibrancy. Its striking tonal contrast, expressive directional motion, and high structural stability make these gangsaw slabs the premier material of choice for luxury boutique retail interiors, book-matched feature walls, fireplace surrounds, bathroom vanities, and bespoke architectural stonework worldwide.
General Specifications
- Category: Travertine Sedimentary Natural Stone
- Color: Deep crimson, rich terracotta, and burnt-orange ground gracefully layered with warm coral, pale cream, and subtle copper-brown striations
- Surface Finish Available: Filled & Polished / Filled & Honed / Unfilled Honed / Brushed / Leathered / Tumbled
- Slab Form: Gangsaw Slab / Multi-Wire Slab / Cut-to-Size
- Texture: Cellular, fine-grained micro-crystalline calcite matrix; delivers a silky satin-honed touch or an ultra-glossy filled finish
- Density: 2.44 – 2.55 g/cm³ (Solid sedimentary density with characteristic natural structural porosity)
- Water Absorption: 0.65 – 1.50% (Low-to-moderate porosity — easily filled and sealed for high stain and moisture resistance)
- Compressive Strength: 72 – 102 MPa (Strong structural load-bearing capacity — highly suited for interior flooring, wall cladding, and counter surfaces)
- Abrasion Resistance: Medium-High — demonstrates excellent durability for residential and commercial interior and exterior applications
Processing & Machinery Assessment
FABRICATION & SLAB PROCESSING SUITABILITY
These slabs are produced from selected quarry blocks using state-of-the-art gangsaw machinery and diamond multi-wire saws, ensuring uniform slab thickness calibration, flat surface geometry, and high structural stability. Standard slab dimensions range from L-(240–300) cm × H-(140–180) cm in standard thicknesses of 1.8 cm, 2.0 cm, and 3.0 cm, offering maximum net surface yield for high-impact architectural fabrication. Red Travertine’s cohesive mineral matrix and well-defined vein orientation allow for smooth diamond bridge-saw cutting, precision waterjet profiling, and custom edge detailing with minimal risk of chipping, making it an extraordinary candidate for continuous vein-matched feature walls and seamless floor layouts.
- Recommended Processing: Gangsaw or multi-wire saw slabbing (1.8 cm, 2 cm & 3 cm), followed by full-surface net-backing reinforcement, transparent or color-matched epoxy/cementitious resin pore filling, face calibration, and high-gloss polishing or velvety satin honing (optimized for Vein-matching)
- Expected Slab Yield: High net recovery with a standard yield of approximately 72–82 slabs per raw block (based on 1.8 cm thickness)
- Finish/Polish Result: A luminous mirror-polished surface when resin-filled that intensifies its vibrant terracotta and deep crimson tones, or a velvety matte-honed finish that highlights the warm, organic movement of its natural sedimentary veining
Product Selection Guide
Grade Description
Standard Grade: Suitable for regular residential and commercial use, including interior walls, floors, and basic countertop projects.
Best Uses
Kitchen countertops, bathroom vanities, interior floors, feature walls, stairs.
Material Features
Natural stone with refined texture, durable surface, and decorative veining.
Care and Maintenance
Clean with neutral cleaner. Avoid strong acid or abrasive chemicals.
Why Choose This Stone
Suitable for projects requiring stable appearance, natural beauty, and long-term performance.
Buyer Notes
Natural stone may vary in color and veining. Samples are recommended before bulk order.
About
Country and Quarry Origin
Mined from premium travertine quarries in Denizli Turkey, finished slabs with warm earthy brown base, classic decorative travertine widely adopted for high-end commercial & residential projects worldw
Texture
Natural hydrothermal layered porous structure with evenly scattered micro pores, supports filled sealing and natural unfilled honed surface processing flexibly.
Pattern and Veining
Undulating horizontal bedding veins with gradient brown streaks, natural pore clusters scattered locally, slight tone fluctuation, low batch color difference for retro elegant effect.
Durability
Stable indoor long-term service life; outdoor application requires full penetrating weatherproof sealant to prevent freeze-thaw crack and pore weather expansion.
Available Surfaces
Filled honed, Tumbled, Brushed, Honed
Acid Sensitivity
Poor acid resistance with calcite as main component; acid cleaners & acid rain corrode pores and surface, long acidic contact is strictly forbidden.
Product FAQ
Where can this stone product be used?
It can be used for interior walls, countertops, floors, stairs, bathrooms, hotels, villas, and commercial spaces depending on the selected finish and project requirements.
How should buyers choose this stone?
Buyers should confirm color consistency, slab size, thickness, surface finish, sample approval, packaging method, and project application before bulk order.
How should this stone be maintained?
Clean with neutral cleaner and soft cloth. Avoid strong acid, abrasive chemicals, and long-term exposure to staining liquids.
Physical Properties
- Density
- 2500 to 2600 KGS/M³
- Compressive Strength
- 70 to 110 MPa
Applications
indoor floor & wall panelsVilla facade claddinghotel lobby background walls
Mineralogical Composition
Calcite90-93%
clay minerals3-5%
Chemical Properties
Main component CaCO₃ 89%–94%; carbonate reacts with acid rapidly, triggering pore expansion, surface erosion and uneven brown color fading.
Installation Guide
Wall slabs use dedicated flexible stone adhesive; ground builds anti-crack base layer; exterior applies full anti-acid penetrating sealant.
Cleaning & Maintenance
Adopt neutral professional stone cleaner only; renew protective sealant regularly; wipe acidic spills instantly to protect pore structure integrity.
Custom Cutting
Support customized slab size & 15–50mm thickness, tailor special shapes for columns, border lines and curved panels per engineering drawings.
