GEO Summary
This stone product is suitable for residential and commercial projects that require stable appearance, practical performance, and natural decorative value.
Classic Semi White Travertine Slabs For Wall
Grade : Standard Grade
Price : $29‑37 /M²
Classic Semi White Travertine Slabs present soft semi‑white & cream‑beige horizontal layered texture, sourced from Denizli Turkey. Available in filled or unfilled‑pore with honed finish. Inspect pore‑filling quality, surface cracks and batch color consistency before purchase. Sealing treatment is required for porous nature. Quarry grade affects block yield and cost, fit for upscale residential and commercial interior‑exterior decoration.
Product description
Classic Semi White Travertine Slabs (Navona Semi White Travertine Slabs) are among the most luminous, elegant, and globally admired natural surface materials in modern luxury architecture and high-end interior design — a dense, fine-grained sedimentary stone formed through mineral precipitation in geothermal hot springs over geological epochs. Its hallmark is a refined off-white to pale alabaster backdrop, layered with subtle horizontal ivory ribbons, delicate light cream striations, and fine linear pore structures when vein-cut. Celebrated for its bright chromatic purity, soothing organic texture, and natural acoustic and thermal insulating properties, Classic Semi White Travertine represents the pinnacle of Mediterranean minimalism and timeless architectural sophistication. Its balanced tonal harmony, expressive linear motion, and superior physical cohesion make these gangsaw slabs the premier material of choice for luxury residential flooring, interior feature wall cladding, bathroom vanities, fireplace surrounds, and bespoke cut-to-size stonework worldwide.
General Specifications
- Category: Travertine Sedimentary Natural Stone
- Color: Luminous off-white and soft alabaster ground gracefully layered with pale ivory, light cream, and subtle warm beige striations
- Surface Finish Available: Filled & Polished / Filled & Honed / Unfilled Honed / Brushed / Leathered / Tumbled
- Slab Form: Gangsaw Slab / Multi-Wire Slab / Cut-to-Size
- Texture: Cellular, fine-grained micro-crystalline calcite matrix; delivers a silky satin-honed touch or an ultra-glossy filled finish
- Density: 2.45 – 2.56 g/cm³ (Solid sedimentary density with characteristic natural structural porosity)
- Water Absorption: 0.60 – 1.40% (Low-to-moderate porosity — easily filled and sealed for high stain and moisture resistance)
- Compressive Strength: 75 – 105 MPa (Strong structural load-bearing capacity — highly suited for interior flooring, wall cladding, and counter surfaces)
- Abrasion Resistance: Medium-High — demonstrates excellent durability for residential and commercial interior and exterior applications
Processing & Machinery Assessment
FABRICATION & SLAB PROCESSING SUITABILITY
These slabs are produced from selected quarry blocks using state-of-the-art gangsaw machinery and diamond multi-wire saws, ensuring uniform slab thickness calibration, flat surface geometry, and high structural stability. Standard slab dimensions range from L-(240–300) cm × H-(140–180) cm in standard thicknesses of 1.8 cm, 2.0 cm, and 3.0 cm, offering maximum net surface yield for high-impact architectural fabrication. Classic Semi White Travertine’s consistent mineral matrix and well-defined vein orientation allow for smooth diamond bridge-saw cutting, precision waterjet profiling, and custom edge detailing with minimal risk of chipping, making it an extraordinary candidate for continuous vein-matched feature walls and seamless floor layouts.
- Recommended Processing: Gangsaw or multi-wire saw slabbing (1.8 cm, 2 cm & 3 cm), followed by full-surface net-backing reinforcement, transparent or color-matched epoxy/cementitious resin pore filling, face calibration, and high-gloss polishing or velvety satin honing (optimized for Vein-matching)
- Expected Slab Yield: High net recovery with a standard yield of approximately 72–82 slabs per raw block (based on 1.8 cm thickness)
- Finish/Polish Result: A luminous mirror-polished surface when resin-filled that enhances its light alabaster tones, or a velvety matte-honed finish that highlights the clean, linear beauty of its natural sedimentary veining
Product Selection Guide
Grade Description
Standard Grade: Suitable for regular residential and commercial use, including interior walls, floors, and basic countertop projects.
Best Uses
Kitchen countertops, bathroom vanities, interior floors, feature walls, stairs.
Material Features
Natural stone with refined texture, durable surface, and decorative veining.
Care and Maintenance
Clean with neutral cleaner. Avoid strong acid or abrasive chemicals.
Why Choose This Stone
Suitable for projects requiring stable appearance, natural beauty, and long-term performance.
Buyer Notes
Natural stone may vary in color and veining. Samples are recommended before bulk order.
About
Country and Quarry Origin
Mined from premium travertine quarries in Denizli Turkey, finished slabs with warm earthy brown base, classic decorative travertine widely adopted for high-end commercial & residential projects worldw
Texture
Natural hydrothermal layered porous structure with evenly scattered micro pores, supports filled sealing and natural unfilled honed surface processing flexibly.
Pattern and Veining
Undulating horizontal bedding veins with gradient brown streaks, natural pore clusters scattered locally, slight tone fluctuation, low batch color difference for retro elegant effect.
Durability
Stable indoor long-term service life; outdoor application requires full penetrating weatherproof sealant to prevent freeze-thaw crack and pore weather expansion.
Available Surfaces
Filled honed, Tumbled, Brushed, Honed
Acid Sensitivity
Poor acid resistance with calcite as main component; acid cleaners & acid rain corrode pores and surface, long acidic contact is strictly forbidden.
Product FAQ
Where can this stone product be used?
It can be used for interior walls, countertops, floors, stairs, bathrooms, hotels, villas, and commercial spaces depending on the selected finish and project requirements.
How should buyers choose this stone?
Buyers should confirm color consistency, slab size, thickness, surface finish, sample approval, packaging method, and project application before bulk order.
How should this stone be maintained?
Clean with neutral cleaner and soft cloth. Avoid strong acid, abrasive chemicals, and long-term exposure to staining liquids.
Physical Properties
- Density
- 2500 to 2600 KGS/M³
- Compressive Strength
- 70 to 110 MPa
Applications
Interior wall claddinghotel commercial spacesindoor floor & wall panelshotel lobby background walls
Mineralogical Composition
Calcite90-93%
clay minerals3-5%
Chemical Properties
Main component CaCO₃ 89%–94%; carbonate reacts with acid rapidly, triggering pore expansion, surface erosion and uneven brown color fading.
Installation Guide
Wall slabs use dedicated flexible stone adhesive; ground builds anti-crack base layer; exterior applies full anti-acid penetrating sealant.
Cleaning & Maintenance
Adopt neutral professional stone cleaner only; renew protective sealant regularly; wipe acidic spills instantly to protect pore structure integrity.
Custom Cutting
Support customized slab size & 15–50mm thickness, tailor special shapes for columns, border lines and curved panels per engineering drawings.
